mould 四级六级考研

A spore can quickly spread and form a mould.

一个孢子能迅速蔓延并形成。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形具或无流道具中也用到另一种形主流道。

It is moulded into a basin-like form.

它被做成盆状。

They learned to mould bronze into statues.

他们学会了铸铜像。

We can mould the dress to your figure.

我们能把这件衣服做得合你身。

He moulded a talented amateur into a brilliant actor.

他将一个有才业余艺术爱好者培养成了卓越演员。

He will mould a child into an excellent basketball player.

他把孩子造就成为一个优秀篮球运动员。

Her dress moulds to her figure.

她衣服很合身。

The boy moulded clay into balls.

这男孩把黏土做成球。

A bit of mould is a pleiad of flowers;a nebula is an ant-hill of stars.

一粒菌是一簇美不胜收花朵，一撮星云是无数天体蚁聚。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏浇注法生产出了含碳化硅和粒状填料耐热匣钵。

We still produce all kinds of accurate pattern carves mould , metal trade mark figure , denoter.

各类铝、铝合金制品喷砂、抛光亮、氧化、着色、钝化等。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制师傅技术好坏将直接影响到具整体质量。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定具仿形加工车辆骨架弧度管方法缺点。

Fill the savarin moulds with yogurt mixture. Keep in refrigerator for at least 4 ours or until the mixture is set.

将乳酪冻倒入内,放雪柜内最少4小时待完全凝固.

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱和嵌件置入困难。

Formic acid still can be used at succulence and frumentaceous preservation, have the function that be restrained apparently or prevents mould to grow.

甲酸还可用于青饲料与谷物保藏,有明显抑制或防止菌生长功能。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放料架、副放料架、导向机架、成型主机、成型具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组成。

The purpose of prebending process of longitudinal submerged arc welding pipe production line is introduced;character of roller prebending and mould press type prebending is analyzed.

对螺旋埋弧焊钢管在生产过程中产生咬边原因进行了分析,提出了针对这些原因应采取相应措施。