molds

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有等涂料缸中，涂上涂料。

Try to compact the sand into the mold.

设法把这沙土堆积到模子里。

He is a man of gentle mold.

他是个性格温和人。

The sweatful practice sessions mold mighty football teams.

一连串汗流浃背练磨练出实力强大足球队。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感借口来拒绝它进入你内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多产实践,分析了湿型砂平造型产线上铸钢件产气孔原因,介绍了预防铸钢件气孔措施。

They grow as single cells that reproduce by asexual budding and oval or round in shape. Some yeast produce chains of elongated cells (pseudohypha) that resemble the mycelium of molds.

酵母菌是单细胞以无性出芽方式繁殖,通常圆形或卵圆形。有一些酵母菌能形成假菌丝，类似霉菌菌丝体。

The familiar structures of loose core and ejector of hydrocylinder in injection mold were introduced.The calculating method of selecting hydrocylinder and the key points in using it were discussed.

介绍了液压油缸在注塑模具中常见抽芯及顶出结构,并对选取油缸计算方法和使用要点进行阐述。

In this paper, the arrangement of cavities, the dimension calculation of sprues and gates and the method of mold-testing for a special hooks multi-cavitis plastic injection mold are introduced.

本文以塑料扣码为例介绍了多腔注射模浇注系统设计中型腔排布、非平衡排布时欲达到同时充满型腔浇口尺寸计算及调试。

These superior quality Sensors which are used in Heart Monitoring and Bioinstrumentation Electrodes feature a non flaking coating that is uniformly distributed over the molded plastic substrate.

这些品质卓越传感器应用在心脏监测和物仪器电极，具有非剥落涂层并均匀地分布模压塑料基板上。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期电力工人将它用作涂料，隔离缠绕在一起线圈，还将注满了紫胶纸一层层地压紧制成单独绝缘物。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化叶片表面钴微粒形核核心,通过能谱分析手段,研究型壳内表层白色物质相组成。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金压铸工艺和结构设计。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一模具存放管理措施，保证模具外观上整洁及品质上精准。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉瓦中勾头，滴瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动孢子，是绿藻门中某些绿藻特征。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓产过程中关键模具。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模设计与制造方法,并阐述了模具工作过程。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有解淀粉能力糖化酶霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓产过程中关键模具。