The apron uses Arduino microcontroller, a single chip computer that has Bluetooth connectivity.

智能围裙采用阿尔杜一诺片，这种片能够进行蓝牙连接。

A generic term that does not distinction between microprocessor, microcontroller, and digital signal processor.

一个对于微处理、微控制他数字信号处无差别的通用术语。

The office is fully automated, using a wide range of technology including software scripting, microcontrollers, single-board computers, computer-aided design, 3D printing, laser-cutting, and more.

该办公室是完全自动化的， 使用了广泛的技术，包括软件脚本、微控制、计算、计算助设计、3D 打印、激光切割等。

Around four minutes after assembly, the robot's folding mechanisms cool down enough to set hard and the robot's microcontroller sends signals to the legs to make it walk.

组装后大约四分钟，人的折叠构冷却到足够硬化，人的微控制会向腿部发送信号，使其行走。

Any programmable device, like a PROM, that can be programmed just once by the end user. However, this term is used almost exclusively to refer to microcontrollers with on-chip PROM.

任一可编程的设备，像PROM，仅仅能被最终用户编程一次。然而，这个术语一般被专有地使用在拥有片上PROM的微控制上。

They're composed of multiple layers of circuits, motors, microcontrollers and sensors, all in the single body, and when you control individual folding joints, you'll be able to achieve soft motions like that upon your command.

它们由多层电路、电、微控制和传感组成，都在一个整体中， 当你控制各个折叠关节时，你就能实现像你命令的那样柔软的动作。

As a hug takes place, a barometric pressure sensor and microphone inside the artificial chest detect human touch and begin transmitting data via an Arduino Mega microcontroller board to a Robot Operating System (ROS)-based computer located in the HuggieBot 3.0's 3D-printed head.

当拥抱发生时，人工胸部内的气压传感和麦克风检测人类触碰，并开始通过 Arduino Mega 微控制将数据传输到位于第三代抱抱人3D 打印头中的基于人操作系统的计算。