Complete the following sentences by filling the blanks with proper prepositions and adverbs.

用适当的冠词和副词填空, 完成下列句子。

Fill in the blanks with verbals.

用动词的非谓语形式填空。

White stuccowork of curlicue fills the blank spaces.

白色灰泥被塑成花纹装饰屋顶余白。

She sometimes occupied her blank days with sewing.

她有时做做针线来消磨日子。

Please fill in this blank.

请填一下这个空。

His memory is a blank.

也记不起来。

Have we got any blank videos?

我们有空白录像带吗?

His expression remained studiously blank.

的表情仍是那种故作茫然。

This experiment has filled in the blank space data in nerve system of anourous amphibian type.

本实验在一定程度上填补了有关无尾两栖类神经系统资料的空白。

"An indorsement in blank specifies no indorsee, and a bill so indorsed ecomes payable to bearer."

无记名背书并不书明被背书人，以此方式背书之汇，应成为以持人为收款人之汇。

Write your name, address and telephone number in the blank spaces at the top of the page.

在这一页顶的空白处写上你的姓名、地址和电话号码。

The unfold blank of the complex shape is researched by the method of emit-projection based on sheet neutrosphere.

在板料的中性层上,用放射投影法对复杂钣金固定梁的形进行展开尺寸研究。

Column grains develop well in casting blank, with transcrystalline grains and a little equiaxed grains in the center.

实验中，铸坯中柱达，有穿出现，铸坯心部有少量等轴。

This experiment at some extent has filled in the blank space data in nerve system of anourous amphibian type.

本实验在一定程度上填补了有关无两栖类神经系统资料的空白。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

F. bandwidth, AF gain, BF0 pitch, fast or normal AVC, manual RF gain, and Drake's highly effective series gate noise blanker.

F.带宽、AF增益,BF0程度、斋戒或者常态AVC，人工的射频增益和公鸭的高度地有效系列门谣传比较空白的。

(5) Fountain solution dasage astheno acid small, block blank portion would fall in with hydrophilia, confecting fountain solution entirely in Hong Kong.

（5）润版液用度多、碱性小、印版不满白局部的干火性不离会回升，因此在配制润版液时一定要夺目比例。

Key blanks are available with a conventional key bow that is custom coined for security or as Hybrid Prox or iCLASS electronic key blanks.

这是自定义创造安全或混合感应卡或电子钥匙坯。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

Typesetting: Show your translation in clear paragraph – with a blank line between 2 paragraphs, and underline or overstriking words according to the source document.

明确你的译文的分段——两个段落之间用空格隔开（改为“将你的译文以清晰的段落形式展示——2段译文中间空开一行”），根据原文给重点词汇加粗或加下划线。