simulation 考研GRE六级

This paper researches thethree-dimensional shape measurement technique of structure superface inthe physical simulation experimental facility.

本文对构造物理拟实验中顶面三维面形测量技术进行了研究。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结表明，该方法实现星空视景符合航海拟器精度要求和虚拟场景中漫游实时性要求。

The pilot’s skills are tested through simulation.

飞行员技术是通过拟飞行来检测。

Realizing arithmetic function of sunlight analysis, and giving out some simulation and experimentative results.

给出了实验与拟分析结。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率变化及焊点力学特性因素对仿真结响。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针对要仿真冷却剂系统特点，对系统进行了节点划分，并做了适当简化，以使其适应实时仿真需要。

The contact between welding plate and fixture is treated as constraint in the finite element model of dynamic welding angular distortion simulation for overlayer in CO2 gas arc welding.

摘要采用有限元数值拟方法研究了CO2气体保护堆焊角变形动态过。为了反映夹具和焊接件接触状态，将夹具和焊件统一建立有限元型。

An analytical study and numerical simulation of the pyrolysis chemism and the release of volatiles of micronized coal, accompanying NOx reduction during its recombustion in EFR, has been conducted.

对立式管式携带炉内再燃还原NO过中超细煤粉热解化学机理及挥发份释放进行了分析和数值拟研究。

The constructed solving process is to establish a general SBR model firstly, then to derive the suboptimum solution by trial and error method with the help of simulation tools.

所构造解法是首先建立通用序批式反应器型;然后借助仿真工具试差求取次优解。

The test result indicate that it is able to competent at wave simulation of sea wave spectrum for shipmodel test,and can simulate different wave spectrum in different request.

实验数据分析结表明，该造波机完全可以胜任船耐波性试验要求，并且还可以根据需要拟不同海浪谱，拟精度达到了实验要求。

Using the modified analytic embedded-atom method (MAEAM), the molecular dynamics (MD) simulation was performed to study the premelting and melting behavior of (001) plane of niobium and tungsten.

摘要采用改进分析型嵌入原子方法(MAEAM)，对铌、钨晶体(001)面预熔和熔化过进行分子动力学拟。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立裂纹转子瞬态回应动力学型，得到了有无裂纹转子数值仿真解。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过对机织布、针织布、斜纹布和网眼布等不同种类织物仿真验证了该算法有效性和适应性。

Based on noncoherent DLL and arctan carrier PLL, the curves of tracking errors in general forms are given after a series of computing and simulation.

基于非相关早减迟延时锁定环和反正切载波跟踪环,得出了由一般形式误差解析表达式导出码相和载波相位跟踪误差曲线。

Numerical simulation studies indicate that the adaptive filter is a powerful noise suppresser for correlated interferences, especially for those with amplitude changing and time delay.

数值拟结表明该滤波器对于相关噪声，尤其是有幅值变化和时间延迟情况，有很强抑制效。

There is no complete, systematic simulation available in procedure control because of discon-nection among tower control service, approach control service and area control service.

在序管制拟练习中，存在着塔台管制服务、进近管制服务和区域管制服务互不衔接，不能系统地拟整个管制过问题。

The simulation results show that,compared with the protocols,EDGK is better in the group rekey success ratio and delay in mobile Ad hoc network environment.

拟试验表明,提出组密钥管理方案在移动自组网络中具有良好性能。

For the special requirement and actual application status of medical instrument, the simulation analysis was taken, giving chirurgeon a support to make operating plan.

针对医学器械特殊要求和实际应用场合，进行仿真分析，为医生制订手术方案提供支持。

The simulation results indicate that the complex cascade control system have better performances and robusticity than PID control in the super-heated steam temperature s...

仿真结表明,在过热蒸汽温度控制系统中,采用复合串级控制,显著改善了汽温响应特性,取得了令人满意效。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶拟器重要组成部分，汽车驾驶拟器新一代实时视景系统是一个全新视景仿真和场景管理系统。