finite 六级考研雅思GMAT

These are the finite forms of a verb.

这些是一个动词定形。

In the flatform,finite element analysis is done on compressor valve plate.

在此平台上,对压缩机阀板进行有元分析。

The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.

4、用通用有元分析软件ANSYS建立混凝土轴心和偏心受拉有元模型，进行分析并得到受拉构件应力云图、变形图及开裂图，并与理论分析结果进行比较。

By the equilong unit finite element method based on the Wenkel model, the computation is speeded up remarkably.

采用文克尔模型为基础等长单元有元法,显著地计算速度。

The essay analyses free vibration problem of laying bed build-up board of antisymmetry angle with spline finite element method.

本文用样条有元法,分析反对称角铺设层合板自由振动问题.

A class of nonconforming finite elements are applied to hyperbolic equation with semidiscretization on anisotropic meshes, the optimal error estimates are derived.

摘要在各向异性条件下，讨论双曲型方程一类非协调有元逼近，给出半离散格下最优误差佑计。

Based on this project, this paper has used the finite element method to analyze the similar isotrope rock slope with accumulative stratum.

本文以此工程为背景，对有堆积层类均质岩体边坡稳定性进行有元模拟分析。

The finite element program design method has laid a solid foundation for in depth reseach of physical thoracic impedence rheogram wave form. ?

该程序设计方法为进一步深入研究人体胸腔阻抗血流图波形成因打下基础。

A reliable, feasible finite element analysis model for multi-pin-hole connected structure with multi-cracks was established with contact between pin and the conjunctional structure.

文中运用考虑销钉与结构板件间接触有元分析方法，建立合理计算模型，为多孔多裂纹裂尖应力强度因子供可靠、可行分析途径。

Considering the subnormal subgroups,some equivalent conditions for nilpotency of finite groups are given and a sufficient condition for nilpotency of finite groups is obtained.

研究次正规子群对有群结构影响,得到幂零群若干等价条件和一个充分条件。

Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.

在垂直向加载情况下,应用三维有元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙应力进行分析。

As a qualitative analysis,finite element method gets a more satisfactory result in describing the propagation of the long wave of open channel unconstant flow.

作为一种定性分析，有单元法对描述明渠非恒定流长波传播给出满意结果。

A theory of aeroelastic stability of hingeless rotor blade in hover by using the Galerkin weighted residual finite element method is developed in this paper.

采用伽辽金加权余数有元素法发展一种悬停状态下铰旋翼桨叶气弹稳定性分析方法。

The finite element method is applied to prestressed slabs, the mechanical characters under the normal using load condition are analysised, with unconsidering the lateral restraints.

本文在结合某框架-核心筒结构粘结预应力楼盖工程实例基础上,对侧向约束对预应力楼盖受力性能影响做初步探讨。

The analysis of the finite element method using th e axisymmetric model was employed to assess the mechanics behavior of the rubber toughening in mesostructure.

在细观结构上采用典型轴对称单元有元分析来预测增韧环氧树脂力学行为。

A 3D finite element analytic model was established for the rapier driving system to investigate the structural features of its griper heads, belts and wheels.

摘要针对剑杆织机剑带、剑头、传剑轮结构特点，建立传剑系统三维有元分析模型。

By proving properties of demicontinuous function and series with function terms, use methods of finite coveting theorem and its application in proving problems are introduced.

通过半连续函数及函数项级数等有关性质证明,介绍有覆盖定理使用方法,说明它在证明问题中作用。

In the framework of Geoacoustics interface wave theory,a time domain finite difference model for the propagation of interface wave in shallow sea has been developed.

根据地声界面波相关理论,采用时域有差分法建立浅海沉积层中界面波传播模型。

In this paper, a comprehensive survey for the state of art of a posteriori error estimates in finite element computation for magnetostatics since 1980s is presented.

80年代以来,国际上兴起对恒定磁场后验误差估计研究,本文系统地介绍这方面发展概况。

Using the software of ANSYS, it was carried out nonlinear finite element analysis upon the basic behavior of high-strength concrete shear wall subjected to monodirectional lateral load.

摘要采用ANSYS软件对强混凝土剪力墙在单向水平荷载作用下受力过程进行非线性有元分析。