1.All renascent oxygen is consumed for oxidizing metal anode to form metal oxide film.
当形成足够厚氧化膜后, 阳氧化速度减慢, 阳表面才析出氧气。
2.Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.
公司主要生产石墨块、石墨粉、碳棒、电、阳糊、保护渣等。
3.Extruded magnesium anode are mainly used inwaterboiler,heatexchanger,vapourater,boiler,etc.lt has pro-perty of softingwater,de-dirtresidual,enlong the usinglife,span.
4.Results show that the composite improves the first cycle columbic efficiency and cycle life of anode materials effectively.
结果表明,该碳纳米管复合导电剂可有效提高电材次仑效率和循环寿命。
5.The key technology and technics,which use Simons electrolyze trough with a falcial anode to synthesize lithium fluoroalkylphosphates,are discussed in this paper.
本文探讨了采用以镍板为阳西蒙斯电解槽电解氟化制备氟烷基膦酸锂有关工艺和关键技术。
6.Based on different soil corrosion factors and pipe corrosion principle, obligated current negode protection and sacrifice anode protection can be used here.
根据不同土壤腐蚀因素以及管道腐蚀原理,可以采用强制电流阴保护和牺牲阳阴保护。
7.This paper introduces the technical condition of electrorefine high-nickel and high-sulphur copper anode and analyzes the problem and the reason in the practise.
介绍了高镍高硫铜阳电解技术条件,分析了电解过程中产生问题及其原因,提出了解决对策。
8.Moreover, it was feasible to reduce the oxidation of the alkynol brighter by choosing active nickel as the anode in the bright nickel electroplating.
选择活性镍作为光亮镀镍阳,可以减少炔醇类光亮剂氧化。
9.The picoammeter reads the current at the last dynode, which is equal to the anode current minus the current flowing to the previous dynode.
皮安计在最后一个倍增管电处读取电流,此电流等于阳电流减去流过前一个倍增管电电流。
10.An annular cavity placed around the anode of arcjet was designed to form a regenerative cooling channel on the base of an arc jet.
该文在原有电弧加热发动机基础上进行改进,设计了覆盖发动机阳环形空腔,形成再生冷却通道。
11.The process of decoppering through insoluble anode electrolysis in the solution produced by leaching high grade matte nickel using chlorine is intro-duced in this paper.
本文介绍了氯化浸出高冰镍溶液采用不溶阳电解脱铜方法。
12.To realize the high efficiency of dernisting, thenew type cathode wires and anode tubes with superperformance were developed for increasing the current density and field intensity.